More than sensors+automation
Search
JUMO Middle East

European Business Center
Dubai Investments Park
Office No. 212
P.O. Box 212947
Dubai, UAE

Phone: +971 4 885 5466
Fax: +971 4 885 5468
e-mail: info.ae(at)jumo(dot)net

JUMO Wtrans receiver for RTD temperature probes with wireless transmission of the measured values (90.2931)

Features

  • For measured temperatures between -200 ... +600°C
  • RS485 interface with Modbus protocol
  • Wireless measured value reception
  • No wiring necessary thanks to modern radio technology
  • For max. 16 transmitters per receiver

Description

The Wtrans receiver T01 is used in connection with corresponding Wtrans probes for mobile and stationary temperature measurement. A significant reduction of the installation work is achieved due to the application of the trendsetting radio technology in the ISM band (Industrial, Scientific and Medical Band) 868.4MHz or 915MHz. Cable connections are not required, the radio-based temperature sensor technology also functions in a rough industrial environment.
The supplied lambda/4-antenna with an impedance of 50 ohm can be directly screwed on or fitted externally. When using the antenna wall holder with the 3 meter long antenna cable, the maximum open air range is 300 m. The measured temperature values received are converted in the receiver, displayed and are available as temperature linear poser or voltage signals (0(4) ... 20 mA, 0 ... 10V) and via the digital interface RS485. All receiver outputs are electrically isolated from each other.
The connection to higher-ranking systems, e.g. the device visualization software JUMO SVS3000 or the Modbus master compatible paperless recorder JUMO LOGOSCREEN nt, is possible via the digital interface with Modbus protocol.
Operation and configuration is possible via the keyboard in connection with a 2-line LCD display or, more comfortable, using a set-up program. Thus, parameters such as filter constants, offset, alarms and fly back (minimum and maximum value memory) can be separately set for each channel. For this purpose, a plug is provided on the front for a PC interface with TTL/RS232 or USB/TTL converter to connect the receiver and the PC. The receiver in the mounting rail housing is intended for fitting on a top hat rail 35mm x 7.5mm according to DIN EN 60 715.

Here youcan seehow easily the JUMO Wtrans system can be configured.

Documentation
Data Sheet
Operating Manual
Interface Description
Product Information
Brochure
Press article
Declaration of Conformity
Certificate of non-objection
Certificate
Software

Please take note of our General Terms and Conditions and Clauses for Paragraph 1.4 General Terms and Conditions.

Article number Product description Price of the full version
00488887

JUMO Setup Wtrans

Download 30-Tage-Testversion (29.3 MB)

additional information
price on request
Accessories

Accessory articles

Article number Product description Price / piece
PC interface with converter RS232/TTL price on request
wall power supply 600mA 3-12V MW3N06GS price on request
I-7520A - RS232 to RS422/485 price on request
Moxa CP-132i - 2xRS422/485 price on request
PC interface with converter USB/TTL price on request
Antenna cable 3m, impedance 50ohms price on request
Wall holder with counterweight for lambda antenna price on request
KCND cable SMA-connector 5m price on request
KCND cable Antenna cable, 10m long, price on request
Add.lambda/4 antenna 868MHz 120°C price on request
Add.lambda/4 antenna 915MHz 120°C price on request
Antenna cable 10m, impedance 50ohms 125°C price on request
Lambda/4 antenna +125°C 10m cable price on request
Lambda/4 antenna +125°C 20m cable price on request