Temperature Controllers Overview

As with all JUMO automation components, our temperature controllers have been carefully produced by our in-house development department. Our development process draws on the wide-ranging expertise that our engineers have acquired over many decades. This is reflected in the outstanding technical features of the devices, closely tailored to match specific application areas. All compact controllers and process controllers are equipped with the proven JUMO control algorithms, making it possible to control even higher-order control paths. Integrated math and logic function expand the range of functions of the controllers and enable calculations, links, and evaluations to be performed that could previously only be implemented with the use of external auxiliary devices. High-end devices with a modular structure operate up to eight independent and freely configurable control channels.

JUMO diraTRON 104/108/116/132 – Compact Controllers (702110/11/12/13/14)

Fixed-setpoint or program controller
2 parameter blocks
Autotuning
Setpoint changeover (4 setpoint values)
Ramp function
Timer function
4 limit value monitoring functions
Service counter
Individual operating level
Separate application using structured text (ST code; option)
Math and logic function (option)
Fast wiring through PUSH-IN technology
RS485 interface Modbus RTU slave (option)
Ethernet interface Modbus TCP (option)

JUMO frostTHERM-ATE (604170)

Setting range +1 to +10 °C
Operating mode: manual or automatic reset
Membrane heating for operation up to -15 °C
Self-monitoring of the probe line
Two analog outputs 0 to 10 V
One switching output (relay: max. AC 230 V 6(2) A)
Can be set without opening the case lid
Electrical connection via tension spring terminals
Operating voltage (SELV) AC 24 V

JUMO IMAGO F3000 - Process Control for the Meat Processing Industry (700101)

315 × 171 and 171 × 315 mm formats
5" color graphic display
Two-state/three-state continuous controller, three-step controller, continuous controller
4 control channels
Inputs/outputs can be expanded in a modular structure
99 programs with real-time clock
Math and logic function
Recording function
Modbus interface, PROFIBUS-DP interface

LR 316 - Laboratory controller in a desk-top case (700703)

Wired ready for use
2-state controller
Pt100, Pt1000, Fe-CuNi "L" or NiCr-Ni "K"
Load circuit up to 16A
Modbus port

JUMO exTHERM-DR – Two-State Controller with ATEX and IECEx Approval

Approval Ex II (1) G [Ex ia Ga] II C, Ex II (1) D [Ex ia Da] III C, Ex II (2) G [Ex eb Gb] IIC, Ex II (2) D [Ex tb Db] IIIC
Ignition protection type [Ex ia] with intrinsically safe inputs or [Ex e] with increased safety
Controller output (relay)
Limit value output (relay) for alarm indication
Analog output configurable as actual value output, setpoint value output, or logic output 0/10 V for control of solid state relay
LCD display for process information
USB interface on front and setup program for simple startup

JUMO eTRON M − Electronic Microstat (701060)

Type 701060 is a discontinued type for 2023 − ordering only possible until September 30, 2023. The successor product is the JUMO miroTRON digital indicator, data sheet 701080/701081.

76 × 36 mm format
Heating or cooling operation
Defrosting function
Counters for operating hours and service
LCD display
2 relays
Configuration with setup program

JUMO eTRON M100 - Electronic Cooling Controller (701061)

76 × 36 mm format
Heating or cooling operation
Defrosting process electrically or with hot gas
Counters for operating hours and service
Real-time clock, Modbus interface, data logger
LCD display
Configuration with setup program

JUMO eTRON M100 Electronic 2-Channel Microstat (701066)

2 analog inputs for RTD temperature probes Pt100, Pt1000, KTY1X-6, or KTY2X-6 in 2-wire circuit
Available with a maximum of two 16 A relays and two 8 A relays
Optionally available with buzzer for acoustic alarm
Operating hours counter with integrated service counter
Available with data logger and RS485 interface.
Setup program to configure the device and evaluate the data logger.

JUMO iTRON DR 100 - Compact Controller (702060)

Design width 22.5 mm
Installation on DIN rail, 35 mm
Two-state/three-state controller
LCD display
Timer and ramp function

JUMO dTRON 304/308/316 – Compact Controller with Program Function (703041/42/43/44)

48 × 48, 48 × 96, 96 × 48, 96 × 96 mm formats
Two-state/three-state continuous controller, three-step controller, continuous controller
Inputs and outputs can be expanded in a modular structure
Timer/ramp/program function
Math and logic function
Modbus and PROFIBUS DP interface
Approval DIN EN 14597

JUMO dTRON 304/308/316 - Compact Controller for the Plastics Industry (703046)

48 × 48 mm, 48 × 96 mm, 96 × 96 mm formats
2-state/3-state continuous controller, three-step continuous controller
Inputs/outputs have modular extensibility
Special functions for plastics processing machines
Math and logic function
Interface for Modbus master/slave, current 0/20 mA, PROFIBUS-DP

JUMO DICON touch – Two-Channel/Four-Channel Process and Program Controller with Paperless Recorder and Touchscreen (703571)

Vibrant 3.5 inch color screen, with 320 × 240 pixels and 256 colors
32 programs with easy-to-use program entry and program control
Interfaces as a standard feature: USB host, USB device, RS485 (COM1)
Available as an interface (COM2): RS422/485 Modbus master/slave, PROFIBUS DP, Ethernet, PROFINET IO device
Integrated paperless recorder with tamper-proof data storage
4 individual process screens with user configurable input fields
16 math and logic functions
Flexible through modular hardware
Password-protected user administration
Five-digit analog value display
Individual operating level
Control loop and output level monitoring
Integrated timer and time switch
Service and operating hours counter
Web server for online visualization via a web browser
Alarm by email
Protection type on the front, IP66
AMS2750/CQI-9 calibration certificate
cULus, DNV GL, DIN EN14597 approval

JUMO IMAGO 500 – Multichannel Process Controller and Program Controller (703590)

144 × 130 mm format (installation dimensions 92 × 92 mm)
5" color screen
Two-state controller, three-state controller, three-step controller, position controller, continuous controller
8 control channels
Inputs and outputs can be expanded in a modular structure
50 programs with real time clock
Math and logic functions
Recording function
Modbus and PROFIBUS DP interface

JUMO miroTRON – Electronic Thermostat with PID Two-State Controller Function

Two-state controller with autotuning (option)
Integrated timer function
Service and operating hours counter
Fast wiring through PUSH IN technology
High-quality display and intuitive operation
Configuration on the device or with the setup program through USB interface (USB powered)
Operator guidance with text support in 4 languages
Up to 4 relay outputs
Limit value monitoring function

JUMO miroTRON – Electronic Thermostat with PID Two-State Controller Function

Two-state controller with autotuning (option)
Integrated timer function
Service and operating hours counter
Fast wiring through PUSH IN technology
High-quality display and intuitive operation
Configuration on the device or with the setup program through USB interface (USB powered)
Operator guidance with text support in 4 languages
Limit value monitoring function